Radios

Manage your remote stations and shared equipment

Download Gateway

Loading your radios...

Gathering your radio equipment

Your radio, wherever you are

A radio you add here becomes one you can hear and operate from any browser — VFO, filters, memories, live audio both ways, and the waterfall. The shack PC runs a small gateway that talks CI-V or USB to the rig and keeps a connection to HamRig; nothing needs to be reachable from the internet.

Operate it

The control client with audio, spectrum, memories and PTT — desktop, tablet or phone.

Share it

Hand it to a club: members book airtime, one operator holds control, the rest may listen.

Build a station around it

Link rotators and antenna switches to it so the beam and the antenna follow the band.

From rig to remote station

  1. 1
    Name a locationWhere the radio stands. Rotators and switches at the same place are offered to it later.
  2. 2
    Install the gatewayOn the PC at the radio — Windows, macOS, Linux or a Raspberry Pi.
  3. 3
    Press “Add…” thereIt finds the rig on its port, reads what it can do, and registers it here.
  4. 4
    Open itThe radio shows up on this page and the control client is one click away.
Setup guide
Get the gateway

Icom over CI-V, USB or network today. You can also add a radio by hand here and paste its gateway key — the gateway’s own Add… is simply the shorter road.

Configure your Icom radio for remote operation

Easiest way: let the gateway do this for you.

Install the HamRig Gateway on the PC at your radio, log in and click Add… next to the radio selector — it finds the radio via CI-V, proposes all settings and creates it here, location included.

Download the gateway Setup guide with video · or create the radio manually below

Give your radio a descriptive name
Select your Icom radio model
Choose where this radio is located
Controls who can access this radio and when
Credits charged per minute to non-owners who operate this radio (0 = free). 100 credits = 1 CHF.

Location Required

Create a location first to add radios

Create a Location First

Before adding a radio, you need to create at least one location where your radio will be installed.

Create Location

Add additional information for this radio

0/5000 characters • Supports rich text formatting and images